IMG_4360

Overworked Finish? Here’s How to Fix It

Fast-drying finishes can sometimes be tricky. If you go over the finish with the applicator once the finish has started to dry or “kicked over”, it can create bubbles or make the finish streak. This appearance is caused by pulling the new finish over the partially cured finish. Fortunately, there are many ways to prevent this issue.

Prevention:

Don’t Use Old Finish – Make sure you check the batch codes from the manufacturer of the finish before you lay it down. Expired finishes can be foamy or bubbly, which can affect the way the finish performs.

Lay it and Leave it – Focus on completing the floor a little at a time. Work in an area about 3 by 3 feet – something manageable and comfortable. Once the finish is dry, you can go back to do minor repairs as opposed to repairing a big area of overworked finish.

Don’t Wring Out Applicators – When your “wring out” your applicator during the application process, you are introducing air into the applicator and into the finish you are applying. This will cause foam or bubbles. Instead of wringing out your applicator to remove drips, try just tapping the excess off.

Control the Air Flow – When your coating the floor, make sure the HVAC system is off. This will prevent uneven finish, debris, streaks, etc. Once the floor is finished, wait about 30-45 minutes before turning the system back on.

Add Water – If you are working in high temperatures or low humidity it can be beneficial to add water to your finish to extend the “open” time.  You can add up 12 ounces of water per gallon.

How to Fix it:

Looking for a way to fix overworked finish? The best way to repair these issues is to abrade and recoat.  You can also check out our video on small board repair by clicking here.

Still have questions? Call us at 800-441-1934 to talk with our experts.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>