Finishes and Cures- Continued

worn finishLast week, we discussed three common causes and cures for hardwood floors. Those three were just a few of many of the common issues that can arise with hardwood floors and hardwood floor finishes. If you are frustrated with your floors due to appearance issues, not to worry, most of these issues have an easy solution. Here are two more common issues that you might be experiencing.

Early Finish Wear-

Cause: It seems like it was just yesterday when you applied that new finish to your hardwood floors and you are already seeing wear and tear. There are several variables that can be the cause to an early deterioration. Poor maintenance is the leading cause to a diminishing floor finish. Some of these procedures might include, using too strong of a floor cleaner, using water to clean and/or failure to fully remove grits from the floor’s surface. Also, the use of acrylic floor buy cheap cialis polish products that build up and start to show early wear patterns and dirt embedment.Other common reasons include, damage from pet nails, an inadequate amount of floor finish on the initial finishing process, applying multiple layers of finish and not allowing the previous layers to completely cure and improper sanding techniques.

Cure: If your floors are deteriorating due to improper maintenance issues, most of these problems can be avoided by taking better care of your floors. Simple steps such as, regular dust mopping, appropriate floor cleaners and chemicals, removing poorly wearing floor polish products, and using floor mats and protectants can help to avoid a premature finish wear. Add an additional coat of finish to the floor if an inadequate amount was applied in the beginning. Beware of pet nails length or get booties for the pet.  If your issues are occurring due to a poor floor sanding, your best option is to re-sand the floors using proper sanding procedures.

Iridescent /Blushing Finish-

Cause: Floor finishes are not meant to have a metallic or hazy appearance to them.  This can occur because of inadequate ventilation during the drying process. Inadequate ventilation will cause a solvent saturation in the air above the drying finish. This solvent will settle on the surfaces of the floors and the result will be a metallic or blushing appearance.

Cure: To help avoid this phenomenon always be sure to have adequate ventilation
after the finish is dry to the touch so dust will not settle in the finish. To cure this, the best solution would be to screen and recoat the problem areas using proper ventilation.

Stay tuned for more causes and cures to hardwood floors and hardwood floor finishes!

Micah PetersenMicah Petersen, Product Manager for Basic Coatings, spent the first 15 years of his career as a Research and Development Chemist before becoming Product Manager. In his free time he enjoys spending time with his family and a multitude of outdoor activities. For further questions regarding hardwood floor care and Basic Coatings, please email Micah at

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>